Crusher Lubricant

Crusher equipment is one of the main equipment in mining industry; because crusher based on the huge impact to realize the crushing of the material, it is very easy to damage the crusher in the whole process. If you want to minimize the wear of the crusher, you need to add lubricant to the crusher periodically. However, adding the lubricant also has a knack. If you did not add it properly, not only can not reduce the wear of the crusher, but also will damage the machine. How can we add the lubricant to the crusher properly? Hongxing machine manufacturers will enter it for you. The lubricant that added to the crusher cannot be too much or too little. If the lubricant added to the machine is too much, the momentum generated by the engine will not be able to be well conducted to the pulverizing part of the crusher.

But this part of the force acting on the lubricant which makes the lubricant hotter will. The accumulation of the heat in the machine will damage the machine. If the lubricant added to the machine is too little, the internal parts of the crusher will rub against each other and cause damage. Based on the experience of the maintenance of the crusher, the lubricant that added to the crusher is one-third of the inside space of the machine which is the most appropriate position. We should also notice that before adding the lubricant you should be sure that the added port of the machine is clean. If the dusts fall into the lubricant, it will damage the machine; This is because the dust will increase the wear between the internal parts.As the professional manufacturer of complete sets of mining machinery, such as sand making machine, Henan Hongxing is always doing the best in products and service.limestone dryer: Then here is the question: how much lubricant is reasonable after all? According to the experience of the personnel whose work is to maintain the crusher, the most appropriate amount of lubricant is one thirds of the internal space of the machine.

In addition, there is another thing that the workers should pay attention to when adding lubricant to the machine. That is to clean the mouth of the adding machine, because if dust goes into the machine when adding lubricant, it is also a huge damage to the machine because the dust will increase the friction force among the internal parts of the equipment. To meet the trend of modernization development and the needs of international markets competition, our company has been introducing senior management personnel, scientific and research talents, and graduates continually advanced. And we are taking advantages of advanced technology from United States, Germany, Japan and other countries to achieve self-innovation and effective development.